Duke DQ GEN-102, Руководство оператора с иллюстрированным перечнем запчастей

Страница: 37 / 105

185232 27
Soft Serve Freezer Model GEN-102
e. the beater shaft and the scraper
blade pin holes, as shown in figure
8-6.
Important:
Do not leave parts in sanitizer for
longer than 15 minutes.
5. After all parts are washed, rinse and
place them in the sanitizing solution.
For proper sanitizing, the parts must
remain fully immersed in the sanitizer
for 5 minutes. Allow the parts to air-
dry after sanitizing.
6. The following must be thoroughly
brushed first with a warm dish
detergent solution, then rinsed with
clear water followed by the sanitizing
solution.
a. mix feed tubes from the
refrigerated cabinet to the cylinders
as shown in figure 8-7
b. the inside of the cylinders
including the back wall as shown in
figure 8-8
c. the inside of the drain tube as
shown in figure 8-9
8.3 Cleaning Instructions (continued)
Figure 8-6 Scraper Blade pin holes
Figure 8-7
Brush inside of cylinder mix
feed tubes
Figure 8-8 Clean Cylinders Figure 8-9 Clean Drain Tube