Dufour Yachts 500 Grand Large, Руководство пользователя

Страница: 14 / 78

ENGLISH 26-02-2013
14/78 DUFOUR 500 Grand Large
220 Volts / 110 Volts Installation (ISO 13297 :2000)
DANGER!
The on-board 220V installation is protected by a circuit breaker and fitted with a residual
current device.
The wiring of additional 220 V on-board accessories must be carried out by professionals,
and the master circuit-breaker uprated if necessary.
-
Disconnect the boat’s power supply when system is not in use.
-
Connect the metal cases or housings of installed electrical equipment to the boat’s
protective conductor (green or green / yellow wire).
-
Use double-insulated or earthed electrical appliances.
ATTENTION!
When the boat is moored at the quayside, set the isolator to the "off" position.
DANGER!
Your boat is delivered without a boat / shore power supply cable or shore connection plug.
The cable used must be designed for exterior use. Its cross-sectional area must be
appropriate for its length and the rating of the main circuit-breaker (see electrical diagram).
The plug must be suitable for the socket on the shore (if necessary, seek the advice of a
professional). It should be as close as possible to the
IP 67 / IEC529 type
●
Switch off the shore supply at the on-board isolator before connecting or disconnecting
the shore/boat supply cable.
●
Connect the shore/boat supply cable at the boat end before connecting it to the shore
outlet.
●
Disconnect the shore/boat supply cable at the shore outlet before disconnecting it at the
boat end.
●
Close the shore outlet cover properly.
Never:
●
Make modifications to the shore supply cable; you must only use compatible connectors.
●
Swim close to a boat connected to a shore supply socket:danger of electrocution!
Location of the 220 V master circuit-breaker: starboard cockpit locker.
Have the system inspected at least every two years.
During haul-out maintenance, set to the ‘on’ position in order to have
earth [grounding]
protection via the shore socket.
WARNING
Never let the end of a ship/shore supply cable dangle into the water. It may create an
electrical field that could injure or kill nearby swimmers.