Duevi CE 60-3 GSM, Руководство по установке

Страница: 15 / 39

15 CE60-3GSM - Installer
4. ACTIVATE INSTALLER MENU
To enter the “Installer menu”, disarm the control panel then move
DIP-2
to ON: the control panel will go directly
to installer menu.
With this menu you can change control panel settings by using the “
X ”, “ O ” e “ # ” keys on the panel.
MAINTENANCE Code for SIRR-A/B v2
When
DIP-2
is set to
ON
, the control panel sends a “
maintenance
” radio code. If the control panel is set to
a predisposed siren, it will emits a “beep” and will flash indicating that it is now possible to open the cover
without setting off the tamper alarm.
When
DIP-2
is set to
OFF
, the control panel sends a “
maintenance finished
” radio code. The siren will re-
enable the tamper alarm (it emits a “beep” and flash).
This code will have no effect on the DVTR-RT v2 radio keyboards.
Note
: enable the control panel to transmit its radio codes by learning an
activator in position n. 1
.
4.1. Installer menu
The voice menu cycle is as follows:
To go form one voice menu to the next press the “#” key.
Dip1
OFF
ON
Dip2
12:30 01/02/12 =
Disinserito
▄ X
Cod. Combinatore
0000
Min.Assenza Rete
10
Program.Orologio
12:31 01/02/12
Disarmed
#
1 Clock set up
2 Power OFF (min)
3 SMS PIN Code
6 Learning
Radio Zones
5 Siren test
7 Progr. Zone
8 Progr. Alert
9 Exit Time (sec)
10 Entry Time (sec)
11 PreAlarm (sec)
12 External Alarm
13 Prog.Vocal Msg.
14 Beep Enabled
15 W.lessSabotENABL
16 Door Control
17 Supervis.Enabled
18 Num.Vocal Calls
20 Wireless Saturat
21 Sensor Test
22 GSM Test
24 Clear Memory
25 End Programming
4 Learning
Activators
DIP-2
ON
OFF
DIP-2
19 AUX Relay Relat.
23 Test GPRS Con.ID