Connections
3
Step 1
Connect pneumatic tubes.
Step 2
Connect power supply
Step 3
Flush test. Place the unit onto the mounting frame (no need to lock) and initiate
a full and partial ush independently by waving a hand in front of the ush icon.
If successful proceed to
Section 5 Fill Delay
If either or both ushes were unsuccessful proceed to
Section 4 Boosting
Full Flush
Connect white/clear
pneumatic tube to the
port marked with a full
round symbol.
Wiring Transformer
Wire the transformer to a suitable 3A
fused spur. Ensure all electrical work is
undertaken by a qualied electrician
and is in compliance with all relevant
statutory electrical standards.
Power Up
Plug the power jack into
the socket in the rear of
the unit.
Note:
When powered up
the front icons will ash
red, green then blue.
Partial Flush
Connect green pneumatic
tube to the port marked
with a half round symbol.
