Ducati SUPERSPORT Скачать руководство пользователя страница 62

Страница: 62 / 313

Tips on how to select the sensitivity level

Warning

Excellent operation of the ABS system, for all

available levels, is ensured only with the OE brake

system and with OE tyres and/or with the ones

recommended by Ducati. In particular, OE tyres for

this motorcycle are Pirelli Diablo Rosso III in the

following sizes: 120/70 - 17 at the front, 180/55 - 17 at

the rear. The use of tyres of different size and

characteristics to the original tyres may alter the

operating characteristics of the system thus making it

unsafe. It is recommended not to install tyres of

different size than the ones approved for your vehicle.

Selecting level 3, the ABS will ensure a very stable

braking thanks to lift-up control, and the motorcycle

will keep a good alignment during the whole braking

action.

Selecting level 2, the ABS will privilege more and

more the braking power rather than stability and lift-

up control, which is disabled in level 2.

ABS level 1 is specific for off-road use and ABS is

active only on the front wheel to help braking

performance on dirt roads. In this level there is no lift-

up control.

The choice of the correct level mainly depends on the

following parameters:
1) The tyre/road grip (type of tyre, amount of tyre

wear, the road/track surface, weather conditions,

etc.).

2) The rider's experience and sensitivity: expert

riders can tackle a lift-up in trying to reduce the

stopping distance to a minimum, while less

expert riders are recommended to use setting 3,

that will help them keeping the motorcycle more

stable even in emergency braking.

Содержание SUPERSPORT


























































































































































































































































































































Результаты поиска

Содержание SUPERSPORT

Отзывы:

Ducati SUPERSPORT, Руководство пользователя, Страница: 62 / 313

Результаты поиска

Содержание SUPERSPORT

Отзывы: