Ducati SUPERSPORT Скачать руководство пользователя страница 161

Страница: 161 / 313

Setting the units of measurement: Fuel

consumption

This function allows you to change the units of

measurement of the fuel consumption.

You open the "UNT" menu, as described on the

previous pages.

Select "CONS." option, by pressing button (1) or (2).

Once function is highlighted, press button (4). You

open the "CONS." menu.

When you enter the function, the current unit of

measurement is displayed flashing, followed by the

list of the possible units steady ON: L / 100km, km / L,

mpg (UK), mpg (USA).
Press buttons (1) and (2) to highlight the units of

measurement one by one: in particular, use button (2)

to highlight the following item and button (1) to

highlight the previous item.

Select the required unit of measurement and then

press button (4) to confirm the selected unit; then the

selected unit of measurement is saved in the

instrument panel and the "CONS." indication starts

flashing again.

Press button (1) to make the EXIT box flash; press

button (4) to quit and go back to the previous window.

Fig. 91

160

Содержание SUPERSPORT


























































































































































































































































































































Результаты поиска

Содержание SUPERSPORT

Отзывы:

Ducati SUPERSPORT, Руководство пользователя, Страница: 161 / 313

Результаты поиска

Содержание SUPERSPORT

Отзывы: