Ducati SUPERSPORT Скачать руководство пользователя страница 189

Страница: 189 / 313

DRL (Daytime Running Light) — only for version

with DRL lights

Upon each Key-On, the DRL lights are turned on. It is

possible to switch off the DRL lights by means of

button (5) on the left-hand switch. By pressing button

(5) again, the DRL lights are switched on again.

Note

Every time button (5) is pressed, the DRL light

automatically switches to MANUAL mode. To go back

to the AUTO mode, turn the Key Off and On or set the

AUTO mode by means of the DRL CONTROL function

in the Setting Menu.

By pressing button (7, the high and low beams are

turned on whereas the DRL light is turned off. Upon

releasing the light button (7, the DRL light is

automatically switched on again.
DRL in AUTO mode

If the DRL is in this mode, when starting the engine it

automatically switches off and the low beam is

activated if the instrument panel detects poor light

conditions (NIGHT). If the instrument panel detects

good light conditions (DAY), the DRL remains on and

Fig. 113

Fig. 114

188

Содержание SUPERSPORT


























































































































































































































































































































Результаты поиска

Содержание SUPERSPORT

Отзывы:

Ducati SUPERSPORT, Руководство пользователя, Страница: 189 / 313

Результаты поиска

Содержание SUPERSPORT

Отзывы: