Ducati SUPERSPORT Скачать руководство пользователя страница 126

Страница: 126 / 313

PIN CODE

This function allows the user to activate or modify the

PIN CODE.

The PIN CODE is initially not present in the

motorcycle, it must be activated by the user by

entering his/her 4-digit PIN in the instrument panel,

otherwise the motorcycle cannot be started

temporarily in the case of a malfunction.

To activate this function, refer to "Activating the PIN

CODE" procedure.

To change the PIN refer to "Changing the PIN CODE"

procedure.

In order to temporarily start the motorcycle in case of

malfunction, please refer to the Vehicle Overriding

procedure page 197.

Warning

The motorcycle owner must activate (store) the

PIN code; if there is already a stored PIN, contact an

Authorised Ducati Dealer to have the function "reset".

To perform this procedure, the Authorised Ducati

Dealer may ask you to demonstrate that you are the

owner of the motorcycle.

125

Содержание SUPERSPORT


























































































































































































































































































































Результаты поиска

Содержание SUPERSPORT

Отзывы:

Ducati SUPERSPORT, Руководство пользователя, Страница: 126 / 313

Результаты поиска

Содержание SUPERSPORT

Отзывы: