Ducati SUPERBIKE 1098 R BAYLISS, Руководство пользователя

Страница: 39 / 138

38
E
Clock setting function
This function is used to set the clock time.
To set the clock, enter the menu and select the “TIME Set”
page.
From this page, if you press switch (1, fig. 10) in position B
“
▼
” for 3 seconds, you enter clock setting mode.
On entering this function, the message “AM” flashes on
the display; on pressing switch (1, fig. 10) in position B “
▼
”
the message “PM” will start to flash:
pressing switch (1, fig. 8) in position B “
▼
” returns you to
previous step (if the time is 00:00, on switching from AM
to PM, the display will show 12:00);
if you press switch (1, fig. 10) in position A “
▲
”, you pass
to the hours setting mode and the hours digits will start
flashing. Each time you press the switch in position B “
▼
”,
the count advances cyclically in steps of 1 hour; if you hold
the switch down in position B “
▼
”, the count advances
cyclically in steps of 1 hour every second (when the switch
is held down continuously, the hours do not flash);
if you press switch (1, fig. 10) in position A “
▲
”, you enter
the minutes setting mode and the minute digits will start
flashing. Each time you press the switch in position B “
▼
”,
the minutes increase cyclically in steps of 1 minute; hold the
switch pressed in position B “
▼
” to scroll faster through the
minutes in steps of 1 minute every second. If the switch is
held pressed in position B “
▼
” for more than 5 seconds, the
minutes advance by 1 every 100 ms (when the switch is held
in position B “
▼
” continuously, the seconds do not flash);
if you press the switch in position A “
▲
”, the system
exits setting mode and displays the newly set time.
B
B = ON for 3 secs.
B
B
B
B
A
A
A
A
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
A
A
B
fig. 28