Ducati SUPERBIKE 1098 R BAYLISS страница 127 Скачать руководство пользователя | Manualshive

Страница: 127 / 138

background image

126

E

USA

Carbon monoxide does not react in the same way, but is
toxic. Ducati utilizes lean carburetor settings and other
systems to reduce carbon monoxide and hydrocarbons.

Exhaust Emission Control System

The Exhaust Emission Control System is composed of lean
carburetor settings, and no adjustments should be made
except idle speed adjustments with the throttle stop screw.
The Exhaust Emission Control System is separate from
the crankcase emission control system.

Crankcase Emission Control System

The engine is equipped with a closed crankcase system to
prevent discharging crankcase emissions into the atmosphere.
Blow-by gas is returned to the combustion chamber
through the air cleaner and the throttle body.
Evaporative Emission Control System
California motorcycles are equipped with an evaporative
emission control system which consists of a charcoal
canister and associated piping. This system prevents the
escape of fuel vapors from the throttle body and fuel tank.

Tampering warning

Tampering with Noise Control System Prohibited. Federal
Law prohibits the following acts or causing thereof:
(1) the removal or rendering inoperative by any person, other
than for purposes of maintenance, repair, or replacement, of
any device or element of design incorporated into any new
vehicle for the purpose of noise control prior to its sale or
delivery to the ultimate purchaser or while it is in use; or

(2) the use of the vehicle after such device or element of
design has been removed or rendered inoperative by any
person.

Among those acts presumed to constitute
tampering are the acts listed below:

(1) Removal of, or puncturing the muffler, baffles, header
pipes or any other component which conducts exhaust gases.
(2) Removal or puncturing of any part of the intake system.
(3) Lack of proper maintenance.
(4) Replacing any moving part of the vehicle, or parts of the
exhaust or intake system, with parts other than those
specified by the manufacturer.
This product should be checked for repair or replacement if
the motorcycle noise has increased significantly through use.
Otherwise, the owner may become subject to penalties
under state and local ordinances.

Problems that may affect motorcycle emissions

If you are aware of any of the following symptoms, have the
vehicle inspected and repaired by your local Ducati dealer.
Symptoms:
Hard starting or stalling after starting.
Rough idle.
Misfiring or backfiring during acceleration.
After-burning (backfiring).
Poor performance (driveability) and poor economy.

«
...
125
126
127
128
129
...
»

Содержание SUPERBIKE 1098 R BAYLISS











































































































































Отзывы:

Нет отзывов

Похожие инструкции для SUPERBIKE 1098 R BAYLISS

Бренд: Tao Motor Страницы: 3

Бренд: LAZER Страницы: 13

Бренд: DMC Страницы: 2

GearTronic ZERO GT3100-K1

Бренд: PZRacing Страницы: 2

Бренд: X-lite Страницы: 76

Бренд: W&W Cycles Страницы: 5

Бренд: Cake Страницы: 12

Бренд: KTM Страницы: 21

Бренд: Caberg Страницы: 28

Бренд: Malossi Страницы: 24

Бренд: Yamaha Страницы: 86

Бренд: Yamaha Страницы: 88

Бренд: Yamaha Страницы: 88

Бренд: Yamaha Страницы: 100

Road Star XV17AWX

Бренд: Yamaha Страницы: 110

Бренд: Yamaha Страницы: 650

Бренд: Honda Страницы: 130

Бренд: Husqvarna Страницы: 107

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды