Ducati SUPERBIKE 1098 R BAYLISS, Руководство пользователя, Страница: 37 / 138

36
E
page 8: the display will show “Setup LEV. 8”.
If you wish to set this level, press switch (1, fig. 10) in
position B “
▼
” for 3 seconds; the instrument panel will
automatically quit this page and return to the initial display,
with the level setting indicated on the right-hand side.
If you wish to set the next highest level, press switch
(1, fig. 10) in position B “
▼
”; to return to the previous level,
press switch (1, fig. 10) in position A “
▲
”.
If DTC is activated, the level setting can also be displayed
outside the page “
SEtUP DTC ” at the end of the TOT,
TRIP A, TRIP B and TRIP Fuel display functions.
The level setting will remain in memory even after Key-Off.
If, however, battery power is suddenly cut off (Batt-OFF),
when battery power is restored and the engine is next
switched on (Key-On), the Traction Control will no longer
be activated (DTC OFF).
Tips on how to select the sensitivity level
Warning
The 8 DTC level settings have been calibrated using
the same tyres as those originally supplied with your
motorcycle (same make, model and size).
The use of tyres of different size to the original tyres may
alter the operating characteristics of the system.
In the case of minor differences, such as for example,
tyres of a different make and/or model than the original,
but with the same dimensions (rear = 190/55-17; front. =
120/70-17), it may be sufficient simply to select the the
suitable level setting from those available to restore
optimal system operation.
If tyres of a different size class are used or if the tyre
dimensions differ significantly from the original tyres, it
may be that the system operation is affected to the point
where none of the 8 available level settings will give
satisfactory results.
In this case is it is advisable to deactivate the traction control
system.
If level 8 is selected, the DTC control unit will intervene at
the slightest hint that the rear wheel is starting to spin.
Between level 8 and level 1 there are a further 6 intermediate
levels. The level of DTC sensitivity decreases in equal steps
from level 8 to level 1.
When levels 1, 2 or 3 is selected the DTC control unit will
allow the rear wheel to spin and also slide sideways on
exiting a corner; we recommend that this setting is only
used by very experienced riders.