Ducati DCS4200, Руководство пользователя

Страница: 42 / 52

Owner’s manual
DSC4200
CHAIN SA
W
English
42
(1) Open washer
(2) Washer
(3) Clutch drum
(4) Needle bearing
(5) Clutch shoe
(6) Gasket
6. Front and rear dampers. Replace if
adhered part is peeled or crack is observed on
the rubber part.
10. MAINTENANCE
Saw chain
CAUTION
It is very important for smooth and safe
operation to keep the cutters always sharp.
Your cutters need to be sharpened when:
• Sawdust becomes powder-like.
• You need extra force to saw in.
• The cut way does not go straight.
• Vibration increases.
• Fuel consumption increases.
CAUTION: Cutter setting standards:
• Make sure the saw chain is held securely.
• Make sure the engine is stopped.
• Use a round file of proper size for your
chain.
Chain type: 21BP
File size: 3/16 in (4.76mm)
Place your file on the cutter and push straight
tank, make sure that it comes to the front right
corner. Also clean off dirt in the tank.
(2) Oil filter.
(2)
4. Spark plug
Clean the electrodes with a wire brush and
reset the gap to 0.65 mm as necessary.
5. Sprocket
Check for cracks and for excessive wear
interfering with the chain drive. If the
wearing is found obviously, replace it with
new one. Never fit a new chain on a
worn sprocket, or a worn chain on a new
sprocket.