Ducati DCS4200, Руководство пользователя

Страница: 43 / 52

English
Owner’s manual
DSC4200
CHAIN SA
W
43
(4) Cutter length
(5) Filing angle
(6) Side plate angle
(7) Top plate cutting angle
Guide bar
Reverse the bar occasionally to prevent partial
wear.
The bar rail should always be a square. Check
for wear of the bar rail. Apply a ruler to the bar
and the outside of a cutter. If a gap is observed
between them, the rail is normal.
Otherwise, the bar rail is worn. Such a bar
needs to be corrected or replaced.
(1) Ruler
(2) Gap
(3) No gap
(4) Chain tilts
forward. Keep the file position as illustrated.
(F34).
After every cutter has been set, check the
depth gauge and file it to the proper level as
illustrated.
WARNING Be sure to round off the front
edge to reduce the chance of kickback or
tie-strap breakage.
(1)Appropriate gauge checker.
(2) Make the shoulder round
(3) Depth gauge standard
Make sure every cutter has the same
length and edge angles as illustrated.