background image

31

English

Owner’s manual

DBC 3300M

 BRUSHCUTTER 4 IN 1

31

marked container that is approved by local 
codes and ordinances for such usage.

• Never remove the fuel tank cap while the 

engine is running.

• Never start or run the engine inside a 

closed room or building. Fumes from 
the exhaust contain dangerous carbon 
monoxide.

• Never attempt to make engine adjustments 

while the unit is running and strapped 
to the operator. Always make engine 
adjustments with the unit resting on a flat, 
clear surface.

• Do not pull off the cable.

• Do not lift the machine other than by the 

handle of the shaft.

• Do not rest the machine on the ground 

while the engine runs (e.g.in idling).

• Regular check for damages, failing of 

parts, component or cables. Do not use 
the unit if it is damaged or poorly adjusted. 
Never remove the machine’s guard. 
Serious injury to the operator or bystanders 
could occur as well as damage to the 
machine.

• Inspect the area to be cut and remove all 

debris that could become entangled in 
the nylon cutting head. Also remove any 
objects that the unit may throw during 
cutting.

• Keep children away. Onlookers should be 

kept at a safe distance from the work area, 
at least 15 METER (50 FEET).

• Never leave the machine unattended.

• Do not use this unit for any job other than 

those for which it is intended as described 
in this manual.

• Do not overreach. Keep proper footing and 

balance at all times. Do not run the unit 
while standing on a ladder or on any other 

4. SAFETY PRECAUTIONS

Proper safety precautions must be observed. 
Like all power equipment this unit
must be handled carefully. DO NOT EXPOSE 
YOURSELF OR OTHERS TO DANGER.

Follow these general rules. Do not permit 
others to use this machine unless they are
thoroughly responsible and have read, and 
understand the machine manual and are 
trained in its operation. This machine is not to 
be operated by children.

 Always wear safety goggles for eye 

protection. Dress properly, do not wear 
loose clothing or jewelry that could 
become caught in moving parts of the 
unit. Safe, sturdy,nonskid footwear should 
always be worn. Long hair should be tied 
back. It is recommended that legs and feet  
to be covered to protect from flying debris 
during operation.

• Before using and after dropping or other 

impacts, inspect the entire machine for 
loose parts (nuts, bolts, screws, etc.) 
and any damage. Repair or replace as 
necessary.

• DO NOT USE any attachment with 

this power head other than the ones 
recommended by our company. Serious 
injury to the operator or bystanders could 
result as well as damage to the machine.

• Keep the handles free from oil and fuel.

• Always use proper handles and shoulder 

strap when cutting.

• Do not smoke while mixing fuel or filling 

tank.

• Do not mix fuel in an enclosed room 

or near open flames. Ensure adequate 
ventilation.

•Always mix and store the fuel in a properly 

Содержание DBC 3300M

























































Отзывы: