Ducati DBC 3300M, Руководство пользователя

Страница: 36 / 56

Owner’s manual
English
DBC 3300M
BRUSHCUTTER 4 IN 1
36
WARNING
CAUTION
INSTALLING NYLON LINE CUTTER HEAD
Align hole in adapter plate with hole in shatf and
install locking tool.
Thread cutter head onto shatf (turning it clockwise)
until it is tight.
Remove locking tool.
Head line replacment
WARNING
CAUTION
Do not use a steel blade for edging or scalping.
EXCESSIVE VIBRATION-STOP ENGINE
IMMEDIATELY.
Excessive vibration of blade means that it is not
properly installed. Stop engine immediately and
check blade.
Blade improperly installed will cause injury.
Use only our company original cutting equipment
parts when servicing and repairing the unit.
Head line installation
Insert the hex key (2) into the specific hole in
the angle transmission (3) and rotate the key
gasket (4) by hand until the hex key enters the
inner hole, blocking rotation.
• Ensure that the grooves in the key gasket
(4) mach up perfectly with the angle
transmisson(3).
• Fit the cutting line head (1) screwing it up in
an anticlockwise direction. (see from cutting
line head)
• Remove the hex key (2)