32
ENGLISH
T
ERMINAL
BOARD
J1
Terminal 1 -
230 Vac mains power supply phase
Terminal 2 -
230 Vac mains, blinker and courtesy light power supply neutral
Warning: The power supply voltage polarities must be carefully observed.
Terminal 3 -
230 Vac motor M1 power supply common
Terminal 4 -
230 Vac motor M1 power supply phase (opening)
Terminal 5 -
230 Vac motor M1 power supply phase (closure)
Note
: connect the capacitor of the motor M1 between terminals 4 and 5
Terminal 6 -
230 Vac courtesy light power supply phase
Terminal 7 -
230 Vac blinker power supply phase
T
ERMINAL
BOARD
J3
Terminal 1 –
Opening start push-button’s normally open electric contact
Terminal 2 –
Closing start push-button’s normally open electric contact
Terminal 3 –
Security device’s normally closed electric contact
Terminal 4 –
Common terminal for all electric contacts of commands and security devices
Important: The normally closed inputs not in use must be fitted with jumpers
C
ONNECTOR
J2
Terminal 1 –
230 Vac motor M1 Power supply common
Terminal 2
– 230 Vac motor M1 Power supply common
Terminal 3 –
230 Vac motor M1 Power supply common
Terminal 4 –
230 Vac mains power supply neutral
Important: If the power regulator card is not connected the J2 connector’s terminals 3
and 4 must be bridged with 4 mm insulated faston terminal.
Содержание CTR30
Страница 1: ...1 MANUALE D ISTRUZIONI INSTRUCTIONS MANUAL MANUEL D EMPLOI Manuale V1 0 del 09 04 2001...
Страница 55: ...55...