29
ENGLISH
“Step-by-step” mode (J2 jumper = not inserted J1,J3 jumpers = no effect)
When the metal rolling shutter is closed, the opening start command determines an opening
cycle. At the end of the work time, the metal rolling shutter stops. The operating cycle is
completed (blinker off) and the system waits for a closing start command. If a opening start or
closing start command is supplied when the end of travel has not been reached yet the metal
rolling shutter stops.
“Automatic” mode
(J2 jumper = inserted J1,J3 jumpers = no effect)
When the metal rolling shutter is closed, the opening start command determines an opening
cycle. At the end of the work time, the metal rolling shutter stops. The pause period starts
(blinker off). At the end of the pause period the metal rolling shutter closes automatically. The
operating cycle is complete only when the closing motion has ended. If a opening start or
closing start command is supplied before the end of travel is reached the metal rolling shutter
stops. If a opening start or closing start command is supplied during the pause period the
operating cycle is interrupted and the metal rolling shutter does not close automatically.
Note : The opening start and closing start commands can be supplied by the two
push-buttons of radio-command.
“Cyclical” mode (J1 jumper = inserted J2,J3 jumpers = no effect)
In cyclical mode the difference between the opening start and closing start commands is
cancelled and both commands have the same function. The operation is controlled by a single
start command. In cyclical mode the operation logic selected by means of the jumper J2
remains unchanged.
Содержание CTR30
Страница 1: ...1 MANUALE D ISTRUZIONI INSTRUCTIONS MANUAL MANUEL D EMPLOI Manuale V1 0 del 09 04 2001...
Страница 55: ...55...