7
The control is based on four buttons and an LCD
display.
Switching ON (Master):
Once the heater has been mounted on the wall
and correctly connected to the main electricity
power supply, press the main On-Off switch on
the right hand side of the heater.
After around 3 seconds the screen will show
various information and the heater is ready to
use.
Switching OFF (Master):
To switch off the heater press the main On-Off
switch on the right hand side of the heater. The
LCD screen will be blank and the heater will lose
connection with the
Gateway.
Stand-by function:
Press the Mode/OK button until the
symbol
is present as shown in the following screen.
When the heater is in Stand-by Mode it will retain
programmes and continue to communicate with
the
Gateway but will not heat.
To switch the heater On again, press the MODE
button to choose programme mode
or
manual mode
– you will see the following
screens:
4. OPERATING INSTRUCTIONS
Days of the week
Radio paired icon
Current Mode
(AUTO, MANUAL, OFF)
Increase
Decrease
Mode/OK
AUTO / MANUAL /OFF
CONFIG
PROG
Desired
temperature
Heating indicator
main switch
Programmed hours
Ducasa Vitro-i Controls
