Ducasa VITRO 750 Black, Руководство по эксплуатации

Страница: 5 / 8

MODE DESCRIPTION
COMFORT
Select comfort temperature with the button (+), (-)
Radiator will heat room to required comfort temperature until manually
switched off
ECONOMY
Select economy temperature with the button (+),(-).
Radiator will heat room to required economy temperature until
manually switched off.
PROGRAMME
Heater will operate at the times and modes set in the programme
(see Programming instructions or use optional Ducasa handheld
controller) i.e. comfort, economy or frost protection.
FROST
PROTECTION
Radiator operates when temperature is less than 7ºC
OFF Radiator switched off
SWITCHING ON
Once the radiator has been mounted on the wall and connected to the main electricity power supply, press the main
On-Off switch.
Now press the ON/OFF/PROG switch on the control panel.
When you switch on the radiator the microprocessor reads the memory in the control unit in order to load the last
selected mode. When switched on for the first time the memory is empty and the display will flash constantly until you
set the Comfort temperature.
During use, the control panel will display the temperature and the current operating mode set by the user.
The symbol
will indicate that the heating element is in operation.
Setting The Comfort and Economy Temperature
To set the comfort or economy temperatures the heater must be in the relevant mode i.e. select economy mode to set
economy temperature and comfort mode for comfort temperature.
When the mode is selected, pressing the + and – buttons will increase/decrease the comfort temperature in increments
of 1ºC. Pressing and holding down either button will rapidly change the setting in increments of 1ºC; release the button
when the desired temperature is reached. Once the required temperature has been entered and there is no further use
of the + and – buttons, the control unit will automatically memorise the selected temperature.
Selection Of Mode
Press the Mode/OK button to select the operating mode.
By each press of the button the thermostat moves from one mode to another mode, Comfort , Economy and
Programming . In order to access the frost protection mode press and hold down the button Mode/OK until the
corresponding icon is displayed on the screen.