Ducasa VITRO 750 Black, Руководство по эксплуатации

Страница: 6 / 8

a. Start with the screen displaying the --:-- symbol or
clock (hour : minutes) (OFF mode)
b. Press and hold down (min. 5secs.) the ON/
OFF/PROG button in order to go to the manual
Programming mode
c. Select the operating mode hour by hour by pressing
the + button and then the Mode/OK button to validate.
d. Repeat the operation for each hour of each day of the
week. At the end of programming day 7, the parameters
are automatically saved and the display changes to the
hour adjustment mode to make sure that the time is
valid. Adjust the time if necessary or validate to return
to the OFF mode.
e. To move the programming timetables use the -
(decrease) button. This enables you to move the time
usage without changing the programming. Pressing
and holding down this button accelerates the process.
f. To return to the Comfort or Economy modes press
the Mode/OK button.
a. Make sure that the thermostat is in the shutdown
position or press ON/OFF/PROG in order to go to
the shutdown position.
b. Press and hold down (min. 5secs.) the ON/
OFF/PROG button in order to go to the manual
Programming mode (PRO)
c. Press the ON/OFF/PROG button .
d. Select the day by using the and buttons and
press the button to validate.
e. Adjust the time by using the and buttons and
press the button to validate
The validation causes the heater to return to the
shutdown position.
Due to the characteristics of the radiator, the control
unit has to read the temperature measurement from
the lower part of the apparatus, but it is automatically
adjusted in relation to the comfort temperature setting.
However it is possible to manually adjust this “Thermic
Compensation”.
Room temperature, recorded by an ambient
thermometer minus Comfort setting (temperature)
displayed on the control panel screen = compensation
value.
Put the thermostat in the OFF mode by pressing 1.
the ON/OFF/PROG button..
Press and hold down the
2. button until the 0.0
is displayed on the screen.
Press the
3. and buttons to enter the
adjustment in increments of 0.1ºC.
Press the
4. button to return to the OFF mode.
Reset the radiator to the mode required. 5.
Example
A temperature 22ºC is measured in a room with a •
thermometer while the value of the required Comfort
temperature on the thermostat 20ºC.
The setting for the compensation is therefore:
•
22 – 20 = 2ºC.
In the temperature compensation mode, the user •
should put in: +2ºC.
The keypad can be locked to prevent any unauthorised
person (children, people in public places, nurseries,
offices, hotels etc.) altering the settings and
programming in the control unit. To lock the keypad
depress and hold the and buttons at the same
time. The screen will flash; now validate by pressing
.
Top segments: Comfort
Bottom segments: Economy
No segements: Frost protection
Days of the week
Programming
Setting The Time
Temperature Compensation
Keypad Locking (Anti-Tamper)
COMFORT ECONOMY PROGRAMMATION