ENGLISH
1.
Safety Precautions
This symbol indicates that ignoring instructions may cause death or
serious injury.
WARNING: To prevent death or injury to the user or other people and property
damage, the following instructions must be followed. Incorrect operation due to
ignoring of instructions may cause death, harm or damage.
Installation must be performed according to the installation instructions.
Improper installation can cause water leakage, electrical shock, or fire.
Use only the included accessories and parts, and specified tools for the
installation. Using non-standard parts can cause water leakage, electrical
shock, fire, and injury or property damage.
Make sure that the outlet you are using is grounded and has the appropriate
voltage. The power cord is equipped with a three-prong grounding plug to
protect against shock. Voltage information can be found on the nameplate
of the unit.
Your unit must be used in a properly grounded wall receptacle. If the wall
receptacle you intend to use is not adequately grounded or protected by a
time delay fuse or circuit breaker (the fuse or circuit breaker needed is
determined by the maximum current of the unit. The maximum current is
indicated on the nameplate located on unit), have a qualified electrician
install the proper receptacle.
Install the unit on a flat, sturdy surface. Failure to do so could result in
damage or excessive noise and vibration.
The unit must be kept free from obstruction to ensure proper function and
to mitigate safety hazards.
DO NOT modify the length of the power cord or use an extension cord to
power the unit.
DO NOT share a single outlet with other electrical appliances. Improper
power supply can cause fire or electrical shock.
DO NOT install your air conditioner in a wet room such as a bathroom or laundry
room. Too much exposure to water can cause electrical components to short
circuit.
DO NOT install the unit in a location that may be exposed to combustible gas,
as this could cause fire.
63
