SERVICING & MAINTENANCE
20
RESTORING FACTORY SETTINGS
If the radio fails to work properly or the display is showing
missing or incomplete letters and numbers, you may need
to restore factory settings. This will remove all favourites
and presets and restore the original factory settings.
NOTE: THIS CANNOT BE UNDONE.
•
•
Press and hold down the ‘INFO’ button for three
seconds until ‘Station Order’ (DAB mode) or
‘Factory Reset’ (FM mode) are displayed.
In DAB mode you will need to turn the TUNE knob
until ‘Factory Reset’ is displayed. Press to select.
•
•
A full reset will be performed and all presets, station
lists, time and alarm functions will be cleared.
•
•
After a system reset, the radio will perform a
Quick Scan the first time you select DAB mode.
•
•
In case of malfunction due to electrostatic discharge,
reset the radio (reconnection of power source may be
required) to resume normal operation.
RECHARGEABLE BATTERY CARE
There are a few simple steps you can take to insure that
you get maximum performance from your rechargeable
batteries:
•
•
Break In new batteries -
New batteries come in a
discharged condition and must be fully charged before
use. We recommended that you fully charge and
discharge the new battery three to four times to allow
it to reach its maximum rated capacity.
•
•
Exercise the battery -
Do not leave the battery
dormant for long periods of time. We recommend
using the battery at least once every two to three
weeks. If a battery has not been used for a long period
of time, perform the new battery break in procedure
described above.
•
•
Battery storage -
If you don't plan on using the
radio for a month or more, we recommend storing
the batteries outside the radio in a clean, dry, cool
place away from heat and metal objects. NiMH
batteries will self-discharge during storage; remember
to break them in before use.
2008.03.18_DLR1GB_IB.qxp 19/03/2008 12:48 Page 20
