16
17
1
THE COVER
AFTER EACH USE
Wipe the ‘stainless steel cover’ with a non-abrasive cloth.
A stainless steel cleaner can be used to restore shine to
the cover only, but do not use an aggressive cleaner or
one that contains ammonia.
2
THE CASTINGS
Wipe the aluminium end castings
with a damp cloth. Do not use a
chemical or abrasive cleaner.
3
THE CRUMB TRAY
4
Crumbs will accumulate in the
crumb tray and could catch fire if
the tray is not emptied frequently.
Pull out the crumb tray and wipe
clean using a damp cloth.
CRUMB
TRAY MUST BE IN PLACE
DURING TOASTING.
With the toaster isolated from the power supply use a
SOFT BRUSH
to clean inside your toaster, do not
use a sharp or metal utensil! Crumbs should be carefully
brushed off the elements using only a soft brush, the
toaster can be turned upside down and excess crumbs
be shaken out.
CLEANING & CARE
IMPORTANT: ensure the toaster is isolated
and allowed to fully cool before starting to clean.
Any other servicing should be performed by authorized service representative.
ISO
LA
TE
F
RO
M
P
O
W
ER SUPPLY W
H
EN
N
O
T IN
US
E
THE INTERNALS
1
TO PREVENT
ACTIVATING THE
THERMAL
PROTECTION
DEVICE:
• Ensure your toaster is
situated in an area with at
least 20cm of space to the
left, right and back of the
toaster.
• Use the toaster clear of
overhanging cupboards and
away from any flammable
materials.
Always load bread into the
toaster starting from the left
hand slot.
2
5
Always use the
appropriate setting
for the number of
slices of bread to be
toasted.
Always isolate the toaster
after use.
UNPLUG
THERMAL PROTECTION DEVICE
1
st
nd
rd
2
3
3
Be mindful of reducing the
toasting time if the toaster is
already warm from previous
use, as the bread toasts faster
on 2nd and 3rd cycles.
Be mindful that repeated use
of the Warming Rack
without allowing the toaster
to fully cool between cycles
may cause the device
to activate.
4
FURTHER ROUNDS
WARMING RACK
English
English
