manualshive.com logo in svg

Du Pont SORVALL RT6000B, Руководство по эксплуатации

Поделиться
Скачать
Du Pont SORVALL RT6000B Скачать руководство пользователя страница 27

Warranty

E. I. Du Pont de Nemours and Company makes no warranty of any kind, expressed or
implied, except as stated in this warranty policy.

The SORVALL

®

 RT6000B and T6000B Tabletop Centrifuges are warranted to be free from

defects in material and workmanship for a period of one (1) year from the date of delivery.
Du Pont will repair or replace and return free of charge any part which is returned to its
factory within said period, transportation prepaid by user, and which is found upon
inspection to have been defective in materials or workmanship.  This warranty does not
apply to any damage to any instrument resulting from: normal wear and tear; misuse;
abuse; use of electrical currents or circuits other than those specified on the plate affixed
to the instrument; or use of any rotor other than those intended for use in this instrument.

Du Pont reserves the right to change, alter, modify or improve any of its instruments
without any obligation whatsoever to make corresponding changes to any instrument
previously sold or shipped.

THE FOREGOING OBLIGATIONS ARE IN LIEU OF ALL OTHER OBLIGATIONS AND LI-
ABILITIES INCLUDING NEGLIGENCE AND ALL WARRANTIES, OF MERCHANTABILITY
OR OTHERWISE, EXPRESSED OR IMPLIED IN FACT OR BY LAW, AND STATE OUR
ENTIRE AND EXCLUSIVE LIABILITY AND BUYER’S EXCLUSIVE REMEDY FOR ANY
CLAIM OR DAMAGES IN CONNECTION WITH THE SALE OR FURNISHING OF GOODS
OR PARTS, THEIR DESIGN, SUITABILITY FOR USE, INSTALLATION OR OPERATION.
DU PONT WILL IN NO EVENT BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL
DAMAGES WHATSOEVER, AND OUR LIABILITY UNDER NO CIRCUMSTANCES WILL
EXCEED THE CONTRACT PRICE FOR THE GOODS FOR WHICH LIABILITY IS CLAIMED.

Warranty

Содержание SORVALL RT6000B





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды