manualshive.com logo in svg

Du Pont SORVALL RT6000B, Руководство по эксплуатации

Поделиться
Скачать
Du Pont SORVALL RT6000B Скачать руководство пользователя страница 2

This manual is a guide to the use of the

SORVALL

®

 RT6000B and T6000B

Tabletop Centrifuges

Data herein has been verified and validated and is believed adequate for the intended use
of the centrifuge.  Because failure to follow the recommendations set forth in this manual
could produce personal injury or property damage, always follow the recommendations
set forth herein. Du Pont does not guarantee results and assumes no obligation for the
performance of rotors or other products that are not used in accordance with the
instructions provided. This publication is not a license to operate under, nor a recommen-
dation to infringe upon, any process patents.

Publications prior to the Issue Date of this manual may contain data in apparent conflict
with that provided herein.  Please consider all data in this manual to be the most current.

NOTES, CAUTIONS, and WARNINGS within the text of this manual are used to emphasize
important and critical instructions.

WARNING:

A Warning informs the operator of a hazard or an unsafe practice that could
result in personal injury, affect the operator’s health, or contaminate the
environment.

CAUTION:

A Caution informs the operator of an unsafe practice that could result in
damage of equipment.

NOTE:

A Note highlights essential information.

© 1988 by E. I. du Pont de Nemours & Co.

SORVALL

®

 

Centrifuges

ii

RT6000B & T6000B

Содержание SORVALL RT6000B





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды