DTS DTS-6D, Инструкция по установке и эксплуатации

Страница: 35 / 72

29
VIII INSTALLATION DIAGRAMS
The diagrams on the following pages cover most 35mm installations. Contact DTS if your system does
not appear. 70mm spacer kits are also available from DTS.
Brackets for the DTS Timecode Reader Head, 35mm.
•
D614 - Standard Bracket
For projectors: Century, Simplex, and Cinemeccanica with Kelmar bracket (below). Intended to fit
between the projector and reel arm. We have produced the bracket with the American standard size hole
to accommodate 2” center spacing 3/8 - 16 tap, that is utilized to mount the American made upper reel
arms. Comes with the following hardware:
QTY Description
2 10 x 24 x 1/2” long screw
2 3.4 x 16 x 1” long hex bolt nut
2 3/8” lock washer
•
D615 - DP70 Universal Bracket
Used for American projectors with a penthouse. Comes with tap and drill bit 8-32, and the following
hardware:
QTY Description
2 10 x 24 x 1/2” long screws
2 3.4 x 16 x 1” long hex bolt nuts
2 3/8” lock washers
•
D616 - AA2 bracket
For Norelco AA projectors. Comes with the following hardware:
QTY Description
2 #10 lock washers
3 5/16” x 18 x 5” long screws
3 3/8” split ring lock
2 10 x 24 x 1/2” long screw
•
D617 - DP75 Bracket
Used to mount the DTS timecode reader head to the side of the projector. Comes with same hardware
as the D614.
•
D622 - Front Mount Bracket
Used when installing multiple digital sound heads or when there is not room to lift the projector arm.
Used with Dolby SR-D
TM
and Sony SDDS
TM
reader heads.
•
5006-0001-00 Cinemeccanica Bracket / adapter plate
For Cinemeccania projectors. Must be used with the D164 standard bracket for mounting the DTS
timecode reader head. If the reel arm needs to be remounted, two plates are required. Note:
Cinemeccanica also has their own brackets available. Contact them directly.