DTS DTS-6D, Инструкция по установке и эксплуатации

Страница: 20 / 72

14
V. OPERATION
•
Verify DTS Movie Discs
DTS movie discs are issued to theaters from the film’s studio distribution company. Make sure your discs
match the movie (e.g. “Jurassic Park” film with “Jurassic Park” movie discs).
If the film and discs don't
match the digital sound track will not play.
Movies running over 90 minutes will have two movie discs : One labeled 6-track A and another labeled 6-
track B. These discs can be inserted into the A & B drives in any order.
Only one movie disc is needed for movies running at/under 90 minutes. These movie discs will be labeled
“one disc only”. You may place the single disc into either the A or B drive.
Any trailers added to DTS movie disc(s) will be listed on the front of the movie disc(s)
Load only ONE movie title disc (or disc set) into the DTS-6D . Never load two or more movie titles into
one DTS-6D . If running a double feature , change movie discs (to second feature) and cycle power on the
DTS-6D.
•
DTS Trailer Discs
DTS trailer discs are issued to theaters from DTS . DTS trailer discs should reside in the C drive until a
new trailer disc is received . Trailer titles contained on the disc are listed on the disc. If you have a DTS
encoded trailer not listed, then your trailer will not play in DTS digital sound, but it will play in analog. To
verify you have the latest trailer disc, contact DTS Customer Service.
•
Why Three CD-ROM Drives?
Three CD-ROM drives expand the digital play time to 5 hours. Generally, DTS movie discs should be
loaded into drives A and B, and the DTS trailer disc should be loaded into the C drive. Movie discs should
reside in the A drive and/or B drive until the matching DTS formatted feature film is removed.
•
Caddy-less CD-ROM Drives (see Figure 6)
This DTS-6D unit uses caddy-less CD-ROM drives. “Caddy-less” means the drive will not accept a CD-
ROM disc in a caddy. Instead, you must remove the disc from its case and place it on the CD tray.
To load a movie disc, open the drive’s CD tray. Power on the DTS-6D unit. Press the open/close button on
the drive to slide out the CD tray. Remove any disc left in the tray. Remove the movie disc from the CD
caddy (see diagram below) and place it on the tray.
The disc must lay printed side up and flat in the tray .
To slide the tray back into the drive, press the open/close button or gently push the drawer in. While the
DTS-6D is playing in digital, do not press the drive’s buttons as it will cause an interruption in sound and
reset the DTS system.
Use only DTS discs. Music CDs will not work in the DTS-6D unit.