DTM Print LX 3000e Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 65

background image

2

Notices

: The information in this document is subject to change without notice. NO WARRANTY OF ANY KIND IS MADE WITH

REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. No liability is assumed for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material. This document contains proprietary information that is
protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into
another language without prior written consent.

Trademark Acknowledgments

: Windows is a registered trademark of Microsoft Corporation. All other trademarks are the

property of their respective owners.

Printing History

Edition 1.0, 210616, Copyright 2021, All rights reserved.

FCC Compliance Statement

: This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Product Disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for

disposal and recycling options.

Battery Notice

This product contains Perchlorate material. Special handling may apply. For more information, go to

http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

WARNING

THE PRINT AREA CONTAINS HAZARDOUS MOVING PARTS. KEEP FINGERS AND OTHER BODY PARTS AWAY.

CAUTION!

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR

MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE EXTERIOR

PANELS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. OPERATE THE UNIT

WITH ONLY THE PROPER ELECTRICAL SPECIFICATIONS AS LABELED ON THE PRINTER AND AC ADAPTER.

CAUTION!

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION.

CAUTION!

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO

THE INSTRUCTIONS.

«
1
2
3
4
...
»

Содержание LX 3000e


































































Отзывы:

Нет отзывов

Похожие инструкции для LX 3000e

Бренд: Hoshizaki Страницы: 49

Бренд: DeLonghi Страницы: 22

Бренд: Baumatic Страницы: 40

CAFETIERE 12V TURBO CAR

Бренд: Spotlight Страницы: 8

Classic Brushed

Бренд: Gaggia Страницы: 53

Бренд: Capresso Страницы: 4

Бренд: ARIETE Страницы: 208

Бренд: Brady Страницы: 168

Бренд: Currys Essentials Страницы: 2

Бренд: Haier Страницы: 28

Бренд: Haier Страницы: 80

P-touch Pro PT-H111

Бренд: Brother Страницы: 15

Бренд: Brother Страницы: 4

Бренд: Brother Страницы: 4

Бренд: Brother Страницы: 4

P-touch PT-1100

Бренд: Brother Страницы: 2

P-touch PT-2460

Бренд: Brother Страницы: 116

P-touch PT-2450

Бренд: Brother Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды