![background image](http://html1.mh-extra.com/html/dtm-print/fx810e/fx810e_user-manual_2535942039.webp)
5
.
4
Print Head Pressure Adjustment
When printing on special media (with varying material thickness), the print quality may suffer. You will then need to adjust the
print head pressure.
Use a screw driver and slowly turn the adjustment screws for the print head to increase or reduce the print head pressure. <
Turn t (Plus): The pressure is increased
Turn towards – (Minus): The pressure is reduced
SCREW ( RIGHT )
Screw for adjusting
the print head
pressure on right side
SCREW ( LEFT )
Screw for adjusting
the print head
pressure on left side
5
.
5
Ribbon Wrinkle Adjustment
The use of different ribbon materials may cause wrinkling of the ribbon, which in turn affects the print result as illustrated by the
examples in (a) and (b). To change the print quality, you can adjust the ribbon shield screws like shown on Section 6.3.
Содержание FX810e
Страница 4: ......
Страница 13: ...Put the ribbon rewind assy into position Rolling to flat surface ...