DTM Print FX810e, Руководство пользователя

Страница: 20 / 44

Section 3: Printer Operation
3.1 Printer Operation Interface
Feed Button
Power/ Standby Button
Touch Panel (LCD Display)
Standby button
Make sure the power switch is on. pressing the “Standby button”, wakes up the printer and the display will show “Ready”.
Press and hold the “standby button” for 3 seconds will set the printer back in Standy Mode.
Feed button
When pressing the FEED button, the printer moves the label to the defined stop position. If you are using continuous labels,
pressing the FEED button will move label stock until you release the button again. If you are using individual labels, pressing
the FEED button will move only one label. If the label does not stop at the correct position, please run the auto calibration ( See
Section 3.4 Label size calibration and Self Test Page) f or the label size calibration function on the label stock.
Pause _ Feed button
If you want to pause the printing, press the feed button. The printer will be on pause status, the LCD will show “Pause” till you
press the feed button again to release the Pause Mode.
Cancel Printing_ Feed key
Press and hold feed key for 3 seconds during printing will clear the print job and the Printer will be set to standby mode.