![background image](http://html1.mh-extra.com/html/dtm-print/fx810e/fx810e_user-manual_2535942030.webp)
3.4 Label size calibration and Self Test Page
The printer can automatically detect and store label height. That means the host computer does not need to transmit the label
height to the printer. An d the self self-test function lets you check whether the printer is functioning normally. Here is how you
run the label size calibration and self test test.
Step 1 Check that the label stock is loaded correctly.
Step 2 Switch off the printer.
Step 3 Switch the printer on again, keeping the FEED button pressed. When the READY LED starts to flash red and the STATUS
LED lights up orange, release the FEED button. The printer will now measure the label stock and store the label height
Step 4 Once the printer has successfully measured the label stock, it will print a self self-test label.
The contents of a self self-test printout are listed below.
(The data below is for reference only, actual result may vary according to each situation.)
Printer Model and Firmwave info
USB Port Setting
Serial Port Setting
MAC Address Info
DHCP Enable or Unable
Ethernet IP Setting
Gateway Setting
Sub -Mask Setting
Card Status
Network Status
DRAM info
Imabe Buffer Size
Forms storage info
Graphics storage info
Fonts storage info
Asian fonts storage info
Database Storage info
TTF storage info
Memory Size
Speed, Darkness , Ref. Point, print direction
Media width,length, gap setting info
Options setting info
Reflective Detecting Info
Code Page Setting
Содержание FX810e
Страница 4: ......
Страница 13: ...Put the ribbon rewind assy into position Rolling to flat surface ...