Jumper Settings
5
2.3
J2 - VOLTAGE SELECTION FOR SYSTEM ROM
J2 is used to select the operation voltage of the system ROM.
Table 1: Voltage Selection for System ROM
2.4
J5 – CPU FRONT SIDE BUS FREQUENCY
SETTING
J5 is used to set the CPU Front Side Bus Frequency.
Table 2: CPU Front Side Bus Freq.
2.5
J6 - CLEAR CMOS DATA
J6 is used to clear the content of the CMOS Data in the RTC (build in PIIX4E chip).
Table 3: Clear CMOS Data
