Award BIOS Setup Guide
25
Video Off Method: Choose V/H SYNC+Blank, DPMS or Blank Screen. This is monitor Power
Saving Method. V/H SYNC+Blank means turn off Vertical, Horizontal scanning and blank the
screen. Blank Screen will blank the display screen. DPMS (Display Power Management System)
can allow the System BIOS control the Display Card to turn off the Display.
Video Off After: As the system moves from lesser to greater power-saving modes. Select the
mode in which you want the monitor to blank. The available options are “Suspend” and “NA”.
MODEM Use IRQ: Available options are 3,4,5,7,9,10,11 and NA. It is used to choose the
interrupt line that the Modem is used. “NA” means not available.
Suspend Mode: To set the time period waiting for Suspend Mode when the Power Management
function is set to “User Define”.
HDD Power Down: To select the time period will turn the HDD off. Accessing the HDD again
will take a few seconds for HDD to spin up for operation.
HDD Down When Suspend: When Enabled, the hard disk will power down when the system is
Suspend Mode.
IRQ 8 Break Suspend: You can select Enabled or Disabled monitoring of IRQ8 (the Real Time
Clock) so it does not awaken the system from Suspend Mode.
Soft-Off by PWR-BTTN: Available options are “Instant-Off” and “Delay 4 sec.”. For “Instant-
Off” option, the power of the system will be switched off at once when the power button is
pressed for turn it off. For “Delay 4 sec.” Option, the power of the system will be switched off
with pressing the power button for 4 seconds.
CPUFAN Off In Suspend: When Enabled, the FAN Power on FAN connector will be turn off
when the system is Suspend Mode.
Wake Up On LAN: When Enabled, the external modem ring in or the wake up packet received
by the Network Card, with wake up on LAN feature, can wake up the system.
Wake Up on Modem: When Enabled, the external modem ring in can wake up the system.
Resume by Alarm/Date (of Month)/Timer (hh:mm:ss): To enable the Resume by Alarm will
wake up the system at the time set on the Date (of Month) and Timer (hh:mm:ss).
