manualshive.com logo in svg

DTK PAM-0035S, Руководство пользователя

Поделиться
Скачать
DTK PAM-0035S Скачать руководство пользователя страница 3

                                                                                                       

ii

UNPACKING THE MAINBOARD

The Mainboard comes packed in a sturdy cardboard shipping carton.  The carton contains:

!

The Mainboard

!

PCI IDE Driver Diskette

!

40-pin Hard Disk Cable

!

34-pin Floppy Disk Cable

!

25-pin Serial & 15-pin Game Port Cable

!

9-pin Serial & 25-pin Parallel Port Cable

!

This User's Guide

Note:

Do not remove the mainboard from its original packing until ready to install.

The mainboard is easily damaged by static electricity. Observe the following precautions
while unpacking and installing the mainboard.

1.

Touch an unpainted area of the system chassis before handling the mainboard or
any component.  Doing so, discharges the static charge the user's body may have
built.

2.

Remove the mainboard from its anti-static wrapping and place it on a grounded
surface, component side up.

3.

Inspect the mainboard for damage.  Shipping may have loosened integrated
circuits from their sockets.  If any integrated circuit appears loose, press carefully
to seat it firmly in this socket.

Do not apply power if the mainboard appears damaged.  If there is damage to the board, or
items are missing, contact dealer immediately.

Содержание PAM-0035S



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды