manualshive.com logo in svg

DTK PAM-0035S, Руководство пользователя, Страница: 8 / 58

Поделиться
Скачать
DTK PAM-0035S Скачать руководство пользователя страница 8

                                                                                          Chapter  1 

2

!

 Easy upgrade CPU speed by alter jumpers only.

!

 System & video Bios Shadow, optional caching of shadowed system &

   video BIOS.

!

 Provide FDD channels which support 360K, 720K, 1.2M & 1.44M Floppy Disks,

   two 16550 compatible UARTs, one parallel port with EPP/ECP mode, and one
   joystick port.

!

 Hidden DRAM refresh support.

!

 Support 7 Direct Memory Access channels and 16 Interrupt levels.

!

 Four 16-bit I/O slots, and 4 PCI slots (4 Masters).

!

 Flash ROM supports

!

 Battery backup for CMOS configuration and real time clock/calender.

!

 8MHz AT Bus clock & speed changeable by hardware or keyboard.

!

 User Defined Password to inhibit illegal access.

!

 Baby AT board size = 220mm(W) X 270mm(L).

!

 Performance: (CPU clock = 90MHz / 100MHz)

   - Landmark CPU Speed Test V2.0
     CPU: 519.45MHz / 576.95MHz
     FPU: 1740.43MHz / 1950.34Hz

   - Power Meter V1.7
     61.9MIPS / 68.4MIPS

Содержание PAM-0035S



























































Отзывы:

Нет отзывов