SPLINE Wheels - Technical Manual
9
MOUNTING END CAPS Ø 15 MM
1. Grease the bearings and the inner surface of both
end caps.
2. Fit one of the two end caps and the cover onto the
installation cylinder.
→
end cap non drive side: Push the end cap
with cover onto the small diameter of the
installation cylinder.
→
end cap drive side: Fit the end cap with cover
onto the large diameter of the installation
cylinder.
3. Insert the mounting pin into the installation
cylinder.
4. Tap the cover onto the hub shell.
→
The longer end cap must be placed on the
non drive side.
5. Repeat the procedure for the second end cap.
Содержание SPLINE WHEEL
Страница 1: ...SPLINE WHEELS TECHNICAL MANUAL V2022 03...
