DT SWISS SPLINE WHEEL, Техническое руководство

Страница: 6 / 39

6
1. Pull off both end caps by hand.
If the end caps cannot be pulled off by hand, clamp
the end caps carefully into a vise with ground
clamping jaws and pull the hub / wheel upwards.
2. Clean both end caps and ball bearings with a dry
cloth.
3. Grease the bearings and the inner surface of both
end caps.
4. Put on the left and the right end cap.
→ The shorter end cap must be placed on the
drive side.
5. Push in end caps by hand.