DT SWISS SPLINE WHEEL, Техническое руководство

Страница: 10 / 39

10
MOUNTING END CAPS Ø 12 MM AND Ø 5 MM
When converting to end caps for Ø 12 mm and Ø 5 mm axes, plug-in end caps are fitted instead of the
pressed-on end caps.
1. Grease the bearings and the inner surface of both
end caps.
2. Put on the left and the right end cap.
→ The shorter end cap must be placed on the
drive side.
3. Push in end caps by hand.