DT SWISS 240 OVERSIZE, Техническое руководство

Страница: 8 / 14

8
3.4 REMOVING THE END CAPS
1. Using a suitable wrench, loosen the first end cap
and unscrew it from the axle.
→ 20 mm, 15 mm and 9 mm end caps: 22 mm
wrench
→ QR end caps: 5 mm hex key
2. Slide the disassembly tool onto the axle.
3. Tap the bearing out of the hub shell using the
disassembly tool and a hammer.
4. Fix the axle in the vise using the special fabric
tape.