Dsoon H8PLUS, Руководство пользователя, Страница: 9 / 48

dsoonservice@hotmail.com
4

INSTALLATION
Before you begin learning how to use your trail camera,
you will first need to install a set of
1.5V alkaline AA
batteries and insert a micro SD card. Please take the
time to read the following directions and cautions:
Loading Batteries
1.Open the two latches on the right side of the camera,
and then open the battery protection cover. For
maximum battery life, you should install 8 alkaline AA
batteries into the battery slots.(Removing the battery will
reset the camera time and date)
2.The camera may also be operated by just 4 batteries
installed in four consecutive slots on one side. Battery life
will be shorter with 4 batteries, but the camera will
operate normally. Whether you use 4 or a full set, be sure
to insert each battery with correct polarity (
negative or
flat end against the long spring of each battery slot).
3.Recommends using a full set of new 1.5V alkaline AA
batteries. other batteries should not be used, as the
camera may not function correctly. Anytime you load or
unload batteries, make sure that the camera is
OFF .