DSE XH9950, Инструкция по установке и эксплуатации, Страница: 9 / 37

XH9950 – DSE Wireless ADSL Router 802.11g 4 port
9
3.3 Make sure ADSL service is activated
Note: Before you can use any ADSL modem or router, you must confirm that the
following conditions have been met.
•
You are located within 5Km of an ADSL enabled phone exchange and you
can get Telecom’s ADSL service. This can be checked by contacting
Telecom.
•
Telecom has enabled the ADSL service to your house or office.
•
Because the ADSL and voice works on the same phone line at the same time,
you need to install ADSL filter/s on each of your normal telephone devices or
contact Telecom to install a central splitter.
•
You need to have an account with an Internet Service Provider (ISP) to
enable your new ADSL line to connect to the internet.
3.4 Configure your phone equipment
ADSL works by combining both voice and data signals on the same phone line. At
your premises, these signals need to be separated through the use of an approved
Filter or Splitter. Whilst both achieve the same results, each has their pro’s and cons.
Filter Splitter
Ideal for
Smaller installations with a
limited amount of phone outlets
(phones, answering machines,
cordless phones, 56K modems,
Fax, etc.) Larger installations or situations
where filters cannot be used
(alarm diallers and other
permanently wired telephone
devices).
Installation
method Self install Professional contractor only
Maximum
phones 5 – although double and triple
adaptors can be plugged into the
phone socket of each filter. Unlimited
How to get Dick Smith Electronics – XH7556
or XH8556 Call Telecom on 123
Cost Low per unit for most
installations Higher – depends on installer
and the actual installation