DSE XH9950, Инструкция по установке и эксплуатации, Страница: 25 / 37

XH9950 – DSE Wireless ADSL Router 802.11g 4 port
25
•
WEP (Wired Equivalent Privacy):
Encrypts data frames before transmitting
over the wireless network. Select Disable to allow all wireless computers to
communicate with the access points without any data encryption. Select 64-bit
WEP or 128-bit WEP to use data encryption.
•
Key#1~Key#4:
The WEP keys are used to encrypt data. Both the ADSL
Router and the wireless clients must use the same WEP key for data
transmission. If you chose 64-bit WEP, then enter any 10 hexadecimal digits
("0-9", "A-F") preceded by 0x for each key (1-4). If you chose 128-bit WEP,
then enter 26 hexadecimal digits ("0-9", "AF") preceded by 0x for each key (1-
4).The values must be set up exactly the same on the Access Points as they
are on the wireless client stations. The same value must be assigned to Key 1
on both the access point (your ADSL Router) and the client adapters, the
same value must be assigned to Key 2 on both the access point and the client
stations and so on, for all four WEP keys. You may use one of the four keys at
any time.
•
WPA – PSK Wi-Fi Protected Access, pre-shared key:
Encrypts data
frames before transmitting over the wireless network.
Pre-shared Key:
The Pre-shared Key is used to encrypt data. Both the
ADSL Router and the wireless clients must use the same WPA-PSK key
for data transmission.