DSE XH9950, Инструкция по установке и эксплуатации, Страница: 21 / 37

XH9950 – DSE Wireless ADSL Router 802.11g 4 port
21
o
Bridge Mode:
The modem can be configured to act as a bridging
device between your LAN and your ISP. Bridges are devices that
enable two or more networks to communicate as if they are two
segments of the same physical LAN.
•
PPPoE/PPPoA:
o
Username: Enter your username for your PPPoE/PPPoA connection.
o
Password: Enter your password for your PPPoE/PPPoA connection.
o
Encapsulation: For both PPPoE and PPPoA connections, you need to
specify the type of Multiplexing, either LLC or VC Mux, default is
PPPoA VC-Mux.
•
Connection Setting:
o
Connection: For PPPoE/PPPoA connection, you can select Always on
or Connect on-demand. Connect on demand is dependent on the
traffic. If there is no traffic (or Idle) for a pre-specified period of time),
the connection will be dropped automatically. Once there is traffic send
or receive, the connection will be automatically on.
o
TCP MMS:
TCP Maximum Segment Size.
•
IP Address: The IP address will be provided by your ISP, this will either be a
dynamic IP address in which case the router will obtain the IP address from
the DHCP server or you will be provided with a static IP address. For Static
IP, you will have to enter the IP address, Subnet Mask and Gateway IP
address.
o
NAT:
Select this option to Activate/Deactivate the NAT (Network
Address Translation) function for this VC. The NAT function can be
activated or deactivated per PVC basis.
o
Default Route:
If this option is enabled, the current PVC will be the
default gateway to internet from this device.
o
TCP MTU: Maximum Transmission Unit.