DSE RN-600C Скачать руководство пользователя страница 8

Страница: 8 / 80

USER MANUAL

Megapixel H.264 IP CAMERAS

Page:

DSE SRL - ITALY - WWW.DSE.EU

RN-621B

12VDC

- plug which connect the power supply 220VAC / 12VDC supplied.

12VDC

- plug which connect the power supply 220VAC / 12VDC supplied.

BNC VIDEO

- The camera provides a video output of the analog type with BNC connector that can be connected to a monitor or a

BNC VIDEO

- The camera provides a video output of the analog type with BNC connector that can be connected to a monitor or a

VCR

AUDIO

- This 3.5 mm jack Pink allows you to connect a microphone for sound environmental recovery

AUDIO

- This 3.5 mm jack Pink allows you to connect a microphone for sound environmental recovery

AUDIO OUTPUT

- This 3.5 mm jack lets you connect green local speakers. This feature allows you to create a two-way audio

AUDIO OUTPUT

- This 3.5 mm jack lets you connect green local speakers. This feature allows you to create a two-way audio

conversation between the person in front of the camera and the operator in front of the client PC.

NETWORK -

RJ45 connector to connect the network

NETWORK -

RJ45 connector to connect the network

INPUT / OUTPUT

- This terminal is used to connect the inputs and outputs to control local alarm and signaling contacts. The terminal

INPUT / OUTPUT

- This terminal is used to connect the inputs and outputs to control local alarm and signaling contacts. The terminal

functions are as follows: PIN

RIFER.

DESCRIPTION

COM

Alarm output normally open (NO). It is a relay contact able to control an external device. The max.

drivable current is 130mA

Relay NO 3

GND

alarm input for connecting sensors or external contacts. The ON / OFF type contact

connects between the input terminal and the GND

Digital IN 5

GND

These two terminals running the hardware reset of the camera and restore the factory settings. Should

proceed as follows: 1 - Disconnect the power

2 - connect together with a cable terminals 5 and 6 3 - connect the power

supply the POWER LED will flash.

DEFAULT

Содержание RN-600C

















































































Результаты поиска

Содержание RN-600C

Отзывы:

DSE RN-600C, Руководство пользователя, Страница: 8 / 80

Результаты поиска

Содержание RN-600C

Отзывы: