DSE RN-600C Скачать руководство пользователя страница 75

Страница: 75 / 80

USER MANUAL

Megapixel H.264 IP CAMERAS

Page:

DSE SRL - ITALY - WWW.DSE.EU

firmware Update

Check Firmware Version

How Firmware is the set of software instructions within the camera that govern its operation. The version of the Firmware installed in the

device can be checked by entering the menu

Setup,

then

System,

in the folder

Information.

Setup,

then

System,

in the folder

Information.

Setup,

then

System,

in the folder

Information.

Setup,

then

System,

in the folder

Information.

Setup,

then

System,

in the folder

Information.

You can come to knowledge of the firmware version also simply typing "version.html" after the camera address, for example

http://192.168.0.200/version.html

You can come to knowledge of the firmware version also simply typing "version.html" after the camera address, for example

http://192.168.0.200/version.html

Firmware Update

All RN series cameras allow you to upgrade the camera firmware with a newer one. In any case it is never recommended to update the

firmware unless under indication of our technicians.

The

the firmware update process is done through the browser by going to

Information -> Server Maintenance -> Firmware Upgrade.

the firmware update process is done through the browser by going to

Information -> Server Maintenance -> Firmware Upgrade.

Follow the following guidelines:

1. Obtain the latest version of firmware and save it on the client PC.

Disconnect all clients connected to the camera.

Turn off any scheduled recording SCHEDULE.

Go to the page for updating the firmware, try the update file by clicking on BROWSE,

Содержание RN-600C

















































































Результаты поиска

Содержание RN-600C

Отзывы:

DSE RN-600C, Руководство пользователя, Страница: 75 / 80

Результаты поиска

Содержание RN-600C

Отзывы: