DSE RN-600C Скачать руководство пользователя страница 13

Страница: 13 / 80

USER MANUAL

Megapixel H.264 IP CAMERAS

Page:

DSE SRL - ITALY - WWW.DSE.EU

RN-6901

VIDEO INPUT

- BNC female connector to connect the video source (eg. Camera)

VIDEO INPUT

- BNC female connector to connect the video source (eg. Camera)

VIDEO OUTPUT

- E 'available video output analog BNC connector that can connect to a monitor or a VCR

VIDEO OUTPUT

- E 'available video output analog BNC connector that can connect to a monitor or a VCR

AUDIO

- This 3.5 mm jack lets you connect a microphone to the sound recovery

AUDIO

- This 3.5 mm jack lets you connect a microphone to the sound recovery

AUDIO OUTPUT

- This 3.5 mm jack allows you to connect the local speakers. This feature allows you to create a two-way audio

AUDIO OUTPUT

- This 3.5 mm jack allows you to connect the local speakers. This feature allows you to create a two-way audio

conversation between the person in front of the camera and the operator in front of the client PC.

USB PORTS

- Slot to insert USB or USB Hard Disk drives for normal recording

USB PORTS

- Slot to insert USB or USB Hard Disk drives for normal recording

POWER

- plug which connect the power supply 220VAC / 12VDC supplied.

POWER

- plug which connect the power supply 220VAC / 12VDC supplied.

PORT LAN

- RJ45 connector to connect the network

PORT LAN

- RJ45 connector to connect the network

75 Ohm SWITCH

- The left switch is used to connect or not the 75 ohm termination impedance depending on the device connected to

75 Ohm SWITCH

- The left switch is used to connect or not the 75 ohm termination impedance depending on the device connected to

the analog video. The majority of DVR monitors have integrated impedance so there is no need to intervene in this selection. The switch

to the right does not currently have combined function.

CONNECTOR COM / GPIO

In terms of the RN-6901 is a jack Mini-DIN 9-pin to connect the adapter cable. The following connections are available:

Serial line RS485A and B

- for the control of a motorized speed dome camera with Pelco D / P Lilin and protocols Dynacolor

Serial line RS485A and B

- for the control of a motorized speed dome camera with Pelco D / P Lilin and protocols Dynacolor

RS232 serial line (RXD TXD)

- as above on RS232 BUS

RS232 serial line (RXD TXD)

- as above on RS232 BUS

relay input

- Alarm input to which it is possible to connect a NO contact and with it being able to generate an alarm condition.

relay input

- Alarm input to which it is possible to connect a NO contact and with it being able to generate an alarm condition.

relay output

- Can be operated remotely via browser or motion detection / external input.

relay output

- Can be operated remotely via browser or motion detection / external input.

video Output

additional available

video Output

additional available

The following is the rule of the PIN access scheme for those who want to create a custom connector:

Содержание RN-600C

















































































Результаты поиска

Содержание RN-600C

Отзывы:

DSE RN-600C, Руководство пользователя, Страница: 13 / 80

Результаты поиска

Содержание RN-600C

Отзывы: