DSE RN-600C Скачать руководство пользователя страница 57

Страница: 57 / 80

USER MANUAL

Megapixel H.264 IP CAMERAS

Page:

DSE SRL - ITALY - WWW.DSE.EU

NETWORK - Network Settings

This series of cameras acts as a any network device. This section describes how to configure the network settings. The board is divided into

sections: GENERAL, ADVANCED, SMTP, DDNS.

General

In this section you can be configured to assign IP address to the device and the main network parameters.

DHCP

- Select whether the network works with IP addresses automatically assigned by a DHCP server.

DHCP

- Select whether the network works with IP addresses automatically assigned by a DHCP server.

STATIC IP

- This section allows you to instead set a fixed IP address, with relative Netmask, Gateway and DNS.

STATIC IP

- This section allows you to instead set a fixed IP address, with relative Netmask, Gateway and DNS.

PPPoE

- If the camera is not connected to a network but directly to an ADSL modem must enable PPPoE and enter the login information to

PPPoE

- If the camera is not connected to a network but directly to an ADSL modem must enable PPPoE and enter the login information to

connect to the internet

ENABLE ARP / PING

It allows to enable ARP packets or PING from the network. Disabling this option is recommended if you want to make the

ENABLE ARP / PING

It allows to enable ARP packets or PING from the network. Disabling this option is recommended if you want to make the

camera not easily found the net with traditional PING.

advanced

In this folder are set advanced network configurations, not strictly necessary to the operation of the camera.

Содержание RN-600C

















































































Результаты поиска

Содержание RN-600C

Отзывы:

DSE RN-600C, Руководство пользователя, Страница: 57 / 80

Результаты поиска

Содержание RN-600C

Отзывы: