USER MANUAL
IP cameras for video surveillance
Page:
8
Page:
8
Last updated: May 2009
DSE srl - ITALY - WWW.DSE.EU
CONNECTION WITH MOBILE PHONE
I-PHONE
E 'can connect to cameras with a phone I-Phone
Select the function SAFARI
Insert the camera's IP address
Insert the credentials of the factory access (see above)
Insert the credentials of the factory access (see above)
The link page is similar to that seen on standard browsers, but pictures are
displayed one after the other and not a real video. For this reason, the recording function is
not available.
3G PHONES - STREAMING
E 'can connect the camera with a third-generation mobile phone.
In the camera setup menu to verify that it is enabled that the RTSP function of
Factory is active.
(SETTINGS / BASE / CAMERAS / GENERAL)
In
STREAMING 3G connection,
to insert
the IP address of the camera in the following format:
rtsp: // <IP>: <PORT> /video.3gp,
where IP is the public address of the camera and PORT
rtsp: // <IP>: <PORT> /video.3gp,
where IP is the public address of the camera and PORT
is the port used by the camera (default: 554) Example: rtsp: //100.154.12.123: 554 /
Video.3gp
MOBILE 2.5G - WAP
E 'can connect to cameras with a 2.5G mobile phone via WAP.
In the WAP browser, type the IP address of the camera in the following format:
<IP> .mobile.wml,
where IP is the public address of the camera
<IP> .mobile.wml,
where IP is the public address of the camera
MOBILE 2.5G - BROWSER
E 'can connect to cameras with a 2.5G mobile phone also via the phone's browser.
In the web browser, type the IP address of the camera in the following format:
<IP> .mobile.wml,
where IP is the public address of the camera.
<IP> .mobile.wml,
where IP is the public address of the camera.
