USER MANUAL
IP cameras for video surveillance
Page:
15
Page:
15
Last updated: May 2009
DSE srl - ITALY - WWW.DSE.EU
MAC -
The unique identifier of the equipment
MAC -
The unique identifier of the equipment
DHCP -
Enable this when connected to a network with automatic IP address
DHCP -
Enable this when connected to a network with automatic IP address
assignment
USE THE FOLLOWING IP -
Set IP address manually
USE THE FOLLOWING IP -
Set IP address manually
GET DNS SERVER -
Enable this when connected to a network with automatic IP
GET DNS SERVER -
Enable this when connected to a network with automatic IP
address assignment
USE THE FOLLOWING DNS SERVER
-
USE THE FOLLOWING DNS SERVER
-
Set the DNS server manually.
HTTP PORT
- In general communications
HTTP PORT
- In general communications
HTTP occur on port 80, but you can modify it for specific networking needs. SE uses a port
other than 80, the door will be specified in the address at the time of connection eg.
http://192.168.1.100:2000 to port 2000.
PPPoE
If your Internet connection requires a dial-up procedure with user name and password you
type, as is typically the majority of ADSL connections, you must complete this section
where you can insert the link address, and authentication parameters.
DDNS
To connect to an IP camera through the Internet is highly advisable to have a fixed IP
address. If you can not get it,
all the
cameras in the range support services DDNS (Dynamic DNS) that allow you to constantly
monitor the machine's IP address. The following services are supported DDNS
DYNDNS.ORG
DHS.ORG TZO.COM
In this section you can enter the authentication data provided by the DDNS provider once
subscribed to the service.
UPnP
Enable UPnP (Universal Plug and Play) is highly recommended to make sure that Windows
Explorer can automatically detect the cameras between the network resources. In addition
you can use this protocol to redirect the doors of the router connection to the Internet
without intervening in its configuration (if your router supports UPnP IGD function).
By activating the "UPnP forward" function, the camera will communicate with the router and
direct itself toward the ports indicated necessary to the various functions allowing the
connection from the outside without having to modify the configuration of the router.
BONJOUR
