USER MANUAL
IP cameras for video surveillance
Page:
20
Page:
20
Last updated: May 2009
DSE srl - ITALY - WWW.DSE.EU
NAME / PORT SERVER
- Enter the name and
NAME / PORT SERVER
- Enter the name and
port to use to access the SMTP server from the provider. If you use G-Mail you have to set
the port to 587, and select SSL.
AUTHENTICATION
- E 'can set the data
AUTHENTICATION
- E 'can set the data
needed to authenticate to the SMTP server of the provider and send the email if this
requires authentication for sending (usually not required).
EMAIL RECIPIENT -
You 'can specify up to three e-mail notification recipients
EMAIL RECIPIENT -
You 'can specify up to three e-mail notification recipients
E-MAIL ADMINISTRATOR
- This address
E-MAIL ADMINISTRATOR
- This address
It is used as the sender. To it are then also sent any incoming system messages from the
SMTP server.
OBJECT / MESSAGE
- Enter the text and
OBJECT / MESSAGE
- Enter the text and
the message subject
TEST
- Press the button to test sending
TEST
- Press the button to test sending
e-mail.
ENTER ALARM
In this section it is possible to schedule the sending of e-mail with attachment frame
according to alarm events.
ATTACHED FILE -
Select whether you want to send
ATTACHED FILE -
Select whether you want to send
the
frame
attached to e-mail,
uncheck if you want to send only text.
MOTION DETECTION
- Sending e-mail
MOTION DETECTION
- Sending e-mail
will take place at the motion detection timer (see Motion detection below)
ALARM INPUTS -
Sending the e-mail will snap to the input of external alarm if the
ALARM INPUTS -
Sending the e-mail will snap to the input of external alarm if the
camera as available (see below)
EFFECTIVE PERIOD
- You can choose whether
EFFECTIVE PERIOD
- You can choose whether
send email ALWAYS or only at certain times of the day selected by the programmer.
SEND BY PERIODIC
In this section it is possible to schedule the sending e-mail to cyclically programmed
deadlines
IMAGE FILE NAME -
Enter the general name given to the frame files
IMAGE FILE NAME -
Enter the general name given to the frame files
SUFFIX
- The suffix is a component
SUFFIX
- The suffix is a component
variable that is added from the camera to the image file name set in the previous step. SE
set a suffix name of the file sent will change over time, but if you do not enable the suffix of
the file name will always be the same and therefore
the file will be
overwritten in the FTP server.
DATE HOUR
- When the file name is added
DATE HOUR
- When the file name is added
the date and time as a suffix. For the record it is added 14 figures indicating year (2), month
(2), day (2), time (2), minutes
(2), seconds
(2), number
progressive (2)
SEQUENCE NUMBER
- When the file name is
SEQUENCE NUMBER
- When the file name is
added as a suffix to a consecutive number of 10 digits between 0000000001 and
4294967295
INTERVAL
- Indicate after how many hours / minutes
INTERVAL
- Indicate after how many hours / minutes
make the email is sent with image.
EFFECTIVE PERIOD
- You can choose whether
EFFECTIVE PERIOD
- You can choose whether
ALWAYS send frames or only at certain times of day chosen by the programmer.
EVENTS HTTP
All cameras in the range allow you to send commands to an HTTP server when alarm
events occur. The function can be useful to webmasters for controlling a CGI.
GENERAL
